Arida Clean 600 filter set
Complete filter set for one side, for the Arida Clean 600 air purifier. Choose between HEPA-11 or HEPA-13 air purification. The package contains both a HEPA filter and a carbon filter.
- 2 year warranty
- Developed in Norway
- For Nordic conditions
To maintain optimal air purification and ensure a healthy indoor climate, it is important to change the filters in your Arida Clean 600. Air Purifier regularly. This original filter pack provides effective removal of particles and harmful gases, and extends the life of the air purifier.
Choose the right Arida Clean 600 filter set for your needs
The air purifier comes with HEPA 11 as standard, but for even better filtration you can upgrade to HEPA 13.
| Air filter | Fan capacity |
|---|---|
| HEPA 11 (standard) | 690 m³/h |
| HEPA 13 (optional) | 630 m³/h |
Each filter pack contains:
✔ 1 pc. HEPA filter – Removes small, harmful particles such as pollen, particulate matter, traffic pollution, animal dander and textile fibers.
✔ 1 pc. activated carbon filter – Absorbs harmful gases (VOC), odors and chemicals from, for example, paint, building materials, cooking and cleaning products.
💡 Note: The air purifier has two filter sets, so you will need a total of 2 filter packs if you are going to replace all the filters.
When should air filters be replaced?
The air purifier monitors filter usage and notifies you when it is time for replacement. When the unit has been operating for 3600 hours, the reminder indicator will flash, indicating that the filters should be replaced to maintain maximum performance and lifespan.
The filter's lifespan depends on which fan speed you use:
- Low speed: 1 hour equals 0.25 working hours
- Medium speed: 1 hour equals 0.5 working hours
- High speed: 1 hour equals 1 working hour
- Max speed: 1 hour equals 2 working hours
If the device is used in areas with a lot of dust or pollution, it may be necessary to change the filters more frequently.
How to change the filter in the Arida Clean 600
The filter change itself is simple and only takes a few minutes:
- Turn off the device and unplug it from the power outlet.
- Remove the side panel (attached with magnets)
- Vacuum the pre-filter to remove coarse dust
- Remove the old filters
- Unpack the new filters and install them in the correct order.
- Put the side panel in place
- Repeat the process on the opposite side.
- Plug the power back in and start the air purifier.